| High
Pressure Vacuum Tube |
 |
Introduction:
Thermosyphon solar water heater relies on the
natural circulation of water between the collector
and the tank. As water in the vacuum tubes is
heated it rises naturally into the tank, while
cooler water in the tank flows down to the bottom
of the vacuum tubes, causing circulation throughout
the system. the cold water gained heat indirectly
contacts with the water in the tank but through
a copper tube in the tank.
|
Technical Specification
| Tank
material |
stainless
steel 304 2B |
| Manifold
Casing Material |
stainless
steel |
| Frame
Material |
stainless
steel |
| Pipe
in the tank |
1.2mm*12.5mm
Copper |
| Insulation
|
Polyurethane
50mm |
| Rubber
Seals and Rings |
UV
stabilized high temperature silicone rubber
|
| standard
Pressure |
¡Ü1.2Mpa |
| Mounting
angle |
15¡æ-50¡æ |
| Collector
mounting |
Flat
roof/inclined roof |
| MODEL |
Absorb
area(m2) |
Heat
pipe |
Capability
of the tank
|
Package
measurement of the tank(cm) |
|
diameter |
length |
No. |
| HS-PV1800/58-16 |
1.50 |
¦µ58mm |
1800mm
|
16 |
100/140 |
46*46*155 |
| HS-PV1800/58-20 |
1.88 |
¦µ58mm |
1800mm
|
20 |
130/180 |
46*46*180 |
| HS-PV1800/58-24 |
2.26 |
¦µ58mm |
1800mm
|
24 |
150/200 |
46*46*214 |
| HS-PV1800/58-28 |
2.63 |
¦µ58mm |
1800mm
|
28 |
180/250 |
46*46*245 |
| HS-PV1800/58-32 |
3.00 |
¦µ58mm |
1800mm
|
32 |
200/280 |
46*46*270 |
|
|
| Vacuum
Tube |
 |
Introduction:
This is the simplest and typically the least expensive
active system to install. There is no heat exchanger,
which allows efficient heat transfer directly
to the water. The system Operates at standard
line pressure. It is simple to add capacity to
the system if demand changes. The system integrates
easily with existing systems. When there is not
enough energy for sun, an electrical back up element
will be automatically switched on by controller.
|
Technical Specification
|
Tank
material |
stainless
steel 304 2B |
|
Manifold
Casing Material |
stainless
steel
|
|
Frame
Material |
stainless
steel |
|
Insulation
|
Polyurethane
50mm |
|
Rubber
Seals and Rings |
UV
stabilized high temperature silicone rubber
|
|
standard
Pressure |
¡Ü0.15Mpa
|
|
Mounting
angle |
15¡æ-50¡æ
|
|
Collector
mounting |
Flat
roof/inclined roof
|
| MODEL |
Absorb
area(m2) |
Heat
pipe |
Capability
of the tank N/G
|
Package measurement
of the tank(cm) |
|
diameter |
length |
No. |
| HS-V1500/47-20 |
1.27 |
¦µ47mm |
1500mm
|
20 |
110//140 |
46*46*160 |
| HS-V1500/47-24 |
1.52 |
¦µ47mm |
1500mm
|
24 |
130/180 |
46*46*190 |
| HS-V1500/47-28 |
1.78 |
¦µ47mm |
1500mm
|
28 |
150/220 |
46*46*218 |
| HS-V1500/47-32 |
2.03 |
¦µ47mm |
1500mm
|
32 |
180/230 |
46*46*245 |
| HS-V1500/47-36 |
2.28 |
¦µ47mm |
1500mm
|
36 |
200/260 |
46*46*270 |
| |
|
|
|
|
|
|
| HS-V1800/58-16 |
1.50 |
¦µ58mm |
1800mm
|
16 |
100/140 |
46*46*155 |
| HS-V1800/58-20 |
1.88 |
¦µ58mm |
1800mm
|
20 |
130/180 |
46*46*180 |
| HS-V1800/58-24 |
2.26 |
¦µ58mm |
1800mm
|
24 |
150/200 |
46*46*214 |
| HS-V1800/58-28 |
2.63 |
¦µ58mm |
1800mm
|
28 |
180/250 |
46*46*245 |
| HS-V1800/58-32 |
3.00 |
¦µ58mm |
1800mm
|
30 |
200/280 |
46*46*270 |
| |
|
|
|
|
|
|
| HS-V2000/70-16 |
2.02 |
¦µ70mm |
2000mm
|
16 |
130/180 |
51*51*175 |
| HS-
V2000/70-20 |
2.52 |
¦µ70mm |
2000mm
|
20 |
160/230 |
51*51*215 |
| HS-
V2000/70-24 |
3.02 |
¦µ70mm |
2000mm
|
24 |
190/280 |
51*51*249 |
| HS-
V2000/70-28 |
3.52 |
¦µ70mm |
2000mm
|
28 |
220/320 |
51*51*285 |
| HS-
V2000/70-30 |
3.78 |
¦µ70mm |
2000mm
|
30 |
240/345 |
51*51*305 |
|
Price of the tube (FOB Xiamen):
1500/47:
1800/58:
2000/70:
£¨available, please contact
us for details£©
Package measurement
of the tubes£º
1500/47: a) 300*270*1550mm
20pcs b) 330*270*1550mm 24pcs
1800/58: 280*250*1880mm 12pcs
2000/70: 350*200*2070mm 8pcs
Package measurement
of the frame£º
For HS-V2000/70: 2600*320*130mm
For HS-V1800/58: 2500*320*130mm
For HS-V1500/47: 2000*460*130mm
|
|
| Flat
Plate Separated |
|
Introduction: The
flat plate system contains solar flat plate
collector, storage water tank,
pump station with controller, piping, connections,
valves
etc parts. And the flat plate collector can
be installed on the roof, wall, garden
to face most of sun light. The storage water
tank can be put anywhere as you
like. The pump on/off is controlled through
temperature difference by regulation.
This system can be combined with gas boiler,
oil boiler or electric heater.
Technical Specification
1.Flow
tube: Copper and Aluminum unified core or all
copper core: Header pipe diameter up to 22mm
or 25mm, high intension, and strong pressure
resistance.
2.Absorber plate: The surface
of copper and aluminum unified plate is selective
absorbance coating, long service life over 15
years, and enduring high temperature.
3.Glazing: Tempered Glass,
high transmittance, good heat preservation,
firm and long service life.
4.Working pressure: 0¡Ü1.2MPa
5.Enclosure: Aluminum Alloy
Profile, beautiful appearance and anti-corrosion.
|
MODEL |
Working
pressure |
Measurement
of the plate |
Glazing
type |
Head
copper pipe |
Branch
copper pipe |
Absorber
material |
Absorb
area(m2) |
Capability
of the tank |
|
HS-FA |
0.1 |
200*100*7.6cm |
General
glass |
25*0.31mm |
10*0.31mm |
Aluminum
|
2 |
200L |
|
HS-PFA |
0.6 |
200*100*7.6cm |
Tempered
Glass 4mm |
25*0.7mm |
10*0.7mm |
Aluminum
|
2 |
200L |
|
HS-PFC |
0.6 |
200*100*7.6cm |
Tempered
Glass 4mm |
25*0.7mm |
10*0.7mm |
Copper
0.15mm |
2 |
200L |
|
|
|
